Green Solution

How to Clean the Bong, Bowl or Pipe (Part 2)

METHODS WITHOUT ALCOHOL

Alcohol-free methods are very effective in removing ash, tar, and dirt. These techniques use little aggressive chemicals and require utensils that you can easily find in your home kitchen.

VINAGRE AND SODIUM BICARBONATE

  • Bong
  • Use a cotton swab to clean debris from the bowl. If they are very sticky, you may need a scraper.
  • Rinse the bong with warm water in the sink.
  • Remove the bowl and put it in a zippered bag. Add a teaspoon of baking soda, a dash of vinegar, and fill the bag with half warm water.
  • Shake the bag and let it rest.
  • Now, take the rest of the bong. Put a teaspoon of baking soda inside the mouthpiece, cover it with your hand and cover the stem hole with microporous tape. Shake well.
  • The bicarbonate will stick to the wet surface of the interior. Use a long cleaning brush to rub the interior surfaces.
  • Next, pour a tablespoon of vinegar and fill the chamber with warm water.
  • Cover the holes and shake again.
  • Empty the solution and rinse the bong with warm water.
  • Remove the bowl from the bag and rinse it under the tap. Use a cotton swab to remove the remaining sticky remains.
  • Pipe
  • Insert a pipe cleaner into your device a couple of times to remove any obstructions.
  • Fill a bowl or jar with warm water. Add a tablespoon of baking soda and the same amount of vinegar.
  • Place the pipe inside and let it soak for five minutes.
  • Take out the pipe and rinse it well with warm water.
  • Repeat step 1.

DETERGENT FOR DISHES

  1. Fill the sink with warm water. Add a splash of detergent to create a bubble solution.
  2. With the help of a cotton swab and a scraper, remove all debris from the bong or pipe bowl.
  3. Carefully put your tool in the water and soak it for 20 minutes.
  4. Return to the sink with a cleaning brush or pipe cleaner.
  5. If you are cleaning a bong, use the brush to thoroughly wash the interior surfaces. Use the pipe cleaner for the stem.
  6. If it is a pipe, pass the pipe cleaner inside 3 or 4 times. Dip the pipe in the water between each pass to rinse the stem.
  7. Empty the sink and rinse your tool with warm water.

BOILING WATER

Boiling water is very useful for cleaning these gadgets. But, remember: it is not suitable for thin glass instruments.

  1. Place your bong or pipe in the empty sink. Clean the bowl with a cotton swab and scraper.
  2. Boil the water and fill the bottom of the sink with it.
  3. Let your device stand for 20 minutes, or until the water has cooled sufficiently.
  4. Empty the sink.
  5. Remove waste with a brush and a pipe cleaner.
  6. Rinse with warm water.

ISOPROPYL ALCOHOL

Isopropyl alcohol is an aggressive cleaning agent. Put on gloves and avoid applying it to the outside of wooden pipes. Some coarse salt also helps with this method.

  • Bong
  • Take out the bowl and clean it with a cotton swab and scraper. Then rinse under the tap.
  • Add a tablespoon of coarse salt, followed by a generous stream of isopropyl alcohol.
  • Cover the stem hole with microporous adhesive tape, and the mouthpiece with one hand, but put on a glove. Shake well for 5 minutes.
  • Empty the liquid into the toilet and rinse the bong well with warm water.
  • Soak a handkerchief in isopropyl alcohol and clean the bowl and stem.
  • Soak a pipe cleaner with isopropyl alcohol and clean the inside of the stem. Rinse thoroughly.
  • Pipe
  • With a cotton swab and a pipe cleaner, remove residues from the bowl and inside the stem.
  • Put the pipe in a zippered plastic bag. Add a tablespoon of salt and enough isopropyl alcohol to cover the device.
  • Shake the bag for 5 minutes, and let it rest another 10.
  • Take out the pipe and rinse it well with warm water.
  • Rub the bowl and stem with the help of a pipe cleaner and a brush.
  • Rinse thoroughly.

HOW TO CLEAN THE SIZE OF A BONG AND OTHER PLACES OF DIFFICULT ACCESS

It is very important to spotless the bowl, stem and other hard-to-reach corners. Although we have already mentioned it, it is worth repeating: you may be surprised by the hidden dirt. Dismantle the utensil (if possible) before cleaning it, and get to work with a brush and several pipe cleaners to make sure that your pipe or bong provides you with clean, smooth puffs.

How to Make Your Own Bongs at Home

Learn the best techniques to get you out of trouble when you need it most. You never know when you will need a spare bong. Luckily, making one is easier than you think!

You never know when you can find yourself in the situation of having a bud but no way to smoke your weed. These are difficult times for smokers. It is always useful to know what other options you can find at home.

First, we clarify that the following methods should only be considered as a last option. If you can buy a glass pipe or bong, do it. These are not materials that are traditionally used to smoke weed. With a bong or a pipe, you will always take more advantage of your buds. The taste, combustion, and softness will be better in an object made especially with these factors in mind.

However, the mentioned factors do not include the effect. That is because, technically, you will consume the same amount of THC if you use the same amount of the same marijuana flower.

FRUITS AND VEGETABLES

We start with a method that has been and still is, very popular. In social networks, the trend of smoking with food is returning; the same method that your grandparents used in their time of smoking.

The easiest fruit to turn into a pipe is the apple. This soft but resistant fruit will allow you to carve a pipe system without too much effort. Use the tube of the body of a pen or a small knife to carve the center, but not down. Try not to exceed three-quarters of the height. Once carved, do the same but in a perpendicular direction. These two hollow tubes must be joined in the center of the block.

This is how most people smoke in fruits. You can always make changes to make the experience more enjoyable. If you have a bowl, place it on top of the apple. You can also use the tip of a pen or any other material (which does not melt or produce toxic vapors) as a bowl.

You can customize it even more if you change the type and quantity of fruit. Basically, everything works as long as you can build an airflow system like the apple. You can even stack fruits and vegetables to make a bigger and tastier bong. You can even add water if you use pineapple, for example. You can also try to do it with a coconut and use coconut water! For this, you must insert a hollow tube to the side, cut the top and smoke from there. Sounds delicious.

The options are endless, try and choose your favorites.

DON’T FORGET THE FILTER

Whether you build your pipe with a can of soda or a piece of fruit, it should have a filter. Smoking weed without a filter can be a rather unpleasant experience. A filter keeps loose pieces of grass in the pipe instead of in your mouth, so you can enjoy your bong more.

What filter should you use with your homemade bong? And what can you do if you don’t have a filter?

DIFFERENT TYPES OF FILTERS FOR PIPES

• Brass Filters

Brass filters are the most common in tobacco pipes and many glasses and ceramic bongs. They can be obtained at almost any tobacconist or headshop for very little money. These circular-shaped discs are made of a brass mesh and are the size of a coin. Brass has the advantage of easily bending, so you can use your filters in cups of different sizes. If your brass filter is a bit large for the bowl, you can cut it without problems.

What inconveniences do they have? Brass filters are not as robust as, for example, steel ones. Even if they do not melt, if you use the pipe too much, they will weaken over time, and eventually break.

• Stainless steel filters

Steel filters are often used with acrylic and silicone bongs, although the former can be scratched. They work like brass filters and do not influence the taste. In fact, apart from the silver color, the main difference between these filters and those of brass is that they are more resistant and, therefore, last longer.

Since steel filters are not as malleable as brass filters, they can be more complicated to adapt to irregularly shaped cups.

• Glass or quartz filters

Glass pipe filters are made of a special type of reinforced glass known as borosilicate glass. This heat resistant glass does not crack due to temperature changes and does not break as easily as ordinary glass. Obviously, glass filters are not flexible, nor can they be cut. Therefore, you should make sure you get a filter with the right size for your bowl. As the glass does not wear out, these filters can, in principle, last forever; that is if they do not break or lose.

You can also find quartz filters, which are even more resistant to heat than glass. Replacement quartz or glass filters are not as common as in the case of the previous options, and most quality glass bongs carry borosilicate or quartz glass filters incorporated into their design. These usually have decorative holes instead of the ultra-fine mesh of steel filters.

WHAT FILTER IS BETTER?

There is no “best” filter, the most important thing is that it fits perfectly in the bowl. You will know that it has adapted well when it does not come out when pressed. Otherwise, if it’s brass, steel or glass, it’s up to you.

WHAT TO DO IF YOU DON’T HAVE A FILTER?

Since this article is about creating a homemade bong, chances are you don’t have any filters on hand. In this case, you can make single-use homemade filters with the following options.

A proven method is to cut a piece of aluminum foil and make some holes with a toothpick. Give it the appropriate size and shape and place it in the bowl as if it were a normal filter. Do not worry, the foil does not melt when smoking. That said, these types of filters only last a couple of sessions before losing their integrity.

You can also make a filter with a clip or a piece of rigid wire. Form a spiral and adjust it to the bowl. This works as a decent half filter to keep the ash and grass inside the pipe.

If you have no choice, fill the bowl so you don’t need a filter. Put the larger pieces of grass in the bottom, so that they cover the hole and cannot be inhaled. Distribute the finest particles above in order to increase the surface and obtain an ideal smoke. This method offers no guarantee, but if all else fails, the question is to optimize your experience as best you can.

Cannabis allergy symptoms, treatment and prevention

Dry herb vaporizers are ideal for cannabis smokers who are starting in the world of vaping. In this article, we take a look at dry herb vaporizers, what they are, how they work and how to use them properly.

Do you want to vape marijuana? In that case, dry herb vaporizers are ideal. Unlike vaporizers for concentrates, dried herb vaporizers are designed to be used only with grass, allowing you to enjoy all the advantages that cannabis offers, but without smoke.

WHAT IS A DRY GRASS VAPORIZER?

Vaporizers work by heating and evaporating cannabis cannabinoids and terpenes, without combustion. As the name suggests, dry herb vaporizers are designed to vape buds and other plant matter. In contrast, “ordinary” vaporizers are usually designed to vape concentrates, such as wax, shatter, crumble or CO₂ extracts (in pen vaporizers).

HOW DO DRY GRASS VAPORIZERS WORK?

Vaporizers use heating by conduction and/or convection to convert terpenes and cannabinoids into steam.

Conduction vaporizers use heating elements to transfer heat to the grass, by direct contact. To better understand this process, think about when you fry an egg in the pan; the heat of the stove heats the pan, which in turn cooks the egg by direct contact.

In contrast, convection vaporizers work more like a convection oven, by circulating hot air around the grass. In this way, they heat cannabis gradually and evenly, allowing its compounds to evaporate without burning.

THE DIFFERENT COMPONENTS OF YOUR DRY GRASS VAPORIZER

• Battery: Most portable vaporizers are battery operated. Many modern vaporizers use lithium-ion batteries because they are rechargeable and offer high energy density, a lower self-discharge rate than Ni-Cd or NiMH batteries, and other advantages. The batteries of the vaporizers can be fixed or removable, depending on the model.

• Camera: the camera is the compartment where you put the grass. Older vaporizers had stainless steel chambers, but most modern appliances have ceramic chambers as they heat faster, retain heat better and do not alter the taste of the herb. Some vaporizer manufacturers are starting to use quartz chambers. Although they take a little longer to warm up, the quartz chambers are the best for preserving the natural flavor of marijuana.

• Mouthpiece: The mouthpiece is the part where you absorb the steam from the chamber with your mouth. Different vaporizers can have different types of nozzles, so it is important to take your time to find the one that works best for you. Cylindrical or conical mouthpieces are usually the most comfortable, but their length may make inhalation slightly difficult. Flat nozzles do not have this problem, but they can be a little less comfortable. To achieve maximum flavor, it is advisable to use a vaporizer with a glass nozzle, instead of a silicone or rubber nozzle.

HOW TO USE A DRY GRASS VAPORIZER

Using a dry herb vaporizer is quite simple. And, although each vaporizer is different, the following steps can be applied to most models.

1. Read the instruction manual: your vaporizer includes a manual for a reason. First, read it well to know the specific details of the brand and model of your vaporizer.

2. Charge the vaporizer: most vaporizers on the market come with a USB charger. To fully charge your vaporizer, connect it to a wall outlet instead of connecting it to the computer; In this way, it will recharge faster and extend the life of your lithium battery. The first 2-3 times you use the vaporizer, let the battery drain completely, to help you calibrate the battery and preserve its duration.

3. “Burning”: this step is not usually indicated in the instruction manuals, but it is very important as it helps to clean up any residue that may remain in the chamber as a result of the manufacturing or transport process. Once you have charged the vaporizer battery, make sure the camera is empty and remove any visible particles; Then, turn on the vaporizer and let it warm to maximum temperature. Repeat this process 2-3 times, to help burn and eliminate any residue that may be in the chamber.

4. Prepare your grass: large pieces of buds do not vaporize properly, so you have to grind the grass to a medium-fine size so that its outer surface is larger and more uniform. In this way, your vaporizer can produce better puffs, loaded with all the terpenes and cannabinoids you want.

5. Fill the chamber: for this step, it is better to follow the instructions included with your vaporizer. Remember that you should never overfill the chamber, as this may affect the proper functioning of your vaporizer.

6. Preheat your vaporizer: almost all vaporizers currently available in the market have a preheating function. Use this function to heat your device faster and ensure better vaporization.

7. Set the temperature: when your vaporizer has preheated, it is time to select the temperature. Some vaporizers have default temperature settings, while others offer a range of temperatures for you to choose from. You probably need to do several tests before finding the ideal temperature for you. Most people vape cannabis in a range between 170 and 220° C.

8. Inhale: when your device has reached the selected temperature, it is time to inhale. Take slow and consistent puffs of 3-5 seconds. Keep in mind that, by vaping, you get many more cannabinoids and terpenes from cannabis; therefore, it is advisable to take 1-2 puffs and wait a bit, to avoid getting too smoked soon.

TIPS FOR PERFECT VAPORIZATIONS

• Keep the vaporizer clean: clean your device after each session (you can use cotton swabs and isopropyl alcohol) to keep it working properly and preserve its duration.

• Use well dried and cured grass: more sticky and slightly moist buds are more difficult to vape.

• Get a good grinder: a quality grinder is essential for good vaporization when crushing the herb with the perfect consistency.

• Discover your ideal vaping temperature: for this, start vaping at the lowest temperature (170 ° C) and gradually increase until you find a temperature that offers you full openwork, with the desired effects and the best possible flavor.

• When the device is fully charged, unplug it from the charger to protect battery life.

How to Clean the Bong, Bowl or Pipe (Part 1)

It has happened to all of us. It is time to smoke, but your glass bong is no longer transparent and smells fatal. Also, by puffing your throat irritates you. It is time to undergo a good cleaning. Your lungs will thank you.

There is nothing better than smoking weed with a freshly released bong or pipe. When it is new and bright, your glass device is worth contemplating. The first puffs are pure, clean and soft. But it will not take much time for this transparent work of art to become a tar spotted cataclysm. We are all guilty of neglecting our smoking accessories from time to time. If you use your pipe or bong for a few days in a row, nothing happens, but things start to get ugly in a matter of weeks.

It is easy to know when a glass utensil needs cleaning. But those of silicone or wood are another story. Users of the latter may not realize until their lungs are filled with tar smoke. In this article, we explain why it is essential to keep your smoking tools clean. And then we will see the best ways to do it.

WHY IS IT IMPORTANT TO KEEP ACCESSORIES CLEAN TO SMOKE?

There are plenty of reasons to keep your smoking tools clean at all times. Aesthetics is an important motivation, especially when it comes to glass. What is the point of buying a nice glass rig and letting it fill with ash and tar? You have to respect the works of art!

The usual cleaning of smoking devices also translates into a better taste of the puffs. If you grow your own herb, you will know how much time and effort are needed to produce quality cannabis. To obtain a tasty terpenoid profile, skill and patience are needed. Don’t waste these exquisite flavors by smoking with a dirty bong or pipe.

A dirty bong not only ruins the taste, the accumulation of tar and resin also irritate the throat. The clean bongs offer soft and dense puffs that are a real pleasure. In general, clean equipment provides a more pleasant experience.

HOW FREQUENTLY SHOULD YOU CLEAN YOUR BONG, CAZOLETA OR PIPA?

How often you clean your utensils will depend on the frequency with which you use them. If you smoke in bong every day, tar and resin will accumulate quickly. If you use your pipe or bong once a week, the waste will take longer to agglomerate. For the record, keeping your dirty tool is also not very hygienic.

The more often you clean it, the better. Give your bong or pipe a quick rinse after each smoke to get rid of some tar and resin. When the accumulation becomes serious, it will be time to clean them thoroughly.

WHAT IS YOUR BONG OR PIPA MADE?

Different materials require different cleaning methods. If you use the wrong technique or product, you run the risk of damaging your tool. Discover how the different materials are cleaned.

GLASS AND METAL

Bongs and glass pipes are located at the delicate end of the spectrum. Although they often have a beautiful appearance, they are the most vulnerable. Glass devices can be cleaned with alcohol and alcohol-free methods. However, you should avoid any technique that involves boiling them. Metal pipes, on the other hand, can be boiled.

SILICONE

Silicone bongs are the easiest to clean. These utensils are resistant to heat and cold and withstand (almost) anything. To clean a bong or silicone pipe, you don’t have to complicate your life too much.

WOOD

Wooden pipes can be washed with hot water, but aggressive chemicals could damage them. High-grade alcohol can discolor them and leave a residue. When cleaning a wooden device, it is best to use a mild agent such as vinegar.

HOW TO CLEAN A BONG, CAZOLETA OR PIPA

Now that you know what to avoid, we can start. Cleaning these utensils is a simple multi-step process. To start, you will have to get the following items.

UTENSILS

  • Cleaning Brush / Pipe Cleaner
  • Scraper/knife
  • Plastic cube
  • Cotton swab
  • Zippered plastic bags
  • Microporous Adhesive Tape